Emerson Rosemount 1066 Quick Start Manual page 30

Quick Start Guide
3.3 Main display
The transmitter displays: the primary measurement value and
temperature and up to four secondary measurement values, a fault
and warning banner, and a digital communications icon.
Process measurements
One process variable and process temperature are displayed by
default. For all configurations, the upper display area shows the live
process variable, and the center display area shows the temperature
(default screen settings).
Secondary values
Up to four secondary values are shown in display quadrants at the
bottom half of the screen. You can program all four secondary value
positions to any displayable parameter available.
Fault and Warning banner
If the transmitter detects a problem with itself or the sensor, then
the word Fault or Warning will appear at the bottom of the display. A
fault requires immediate attention. A warning indicates a problematic
condition or an impending failure. For troubleshooting assistance,
press DIAG.
Formatting the main display
You can program the main display screen to show primary process
variables, secondary process variables, and diagnostics.
1. Press MENU.
2. Scroll down to Display. Press ENTER.
3. Main Format is highlighted. Press ENTER.
4. The Sensor 1 process value is highlighted in reverse video.
Press the selection keys to navigate down to the screen
sections that you wish to program. Press ENTER.
30
February 2024
Emerson.com/Rosemount