Emerson Rosemount 1066 Quick Start Manual page 13

Single channel transmitter

Hide thumbs Also See for Rosemount 1066:

February 2024

Figure 1-8: Pipe mount side

1.3

General installation information

1. Install the transmitter with a sun shield or out of direct

sunlight and areas with extreme temperatures.

2. Install the system in an area where vibrations and

electromagnetic and radio frequency interference are

minimized or absent.

3. Keep the transmitter and sensor wiring at least 1 ft (0.30 m)

from high voltage conductors. Ensure there is easy access to

the transmitter and sample conditioning system.

4. The transmitter is suitable for panel, pipe, or surface

mounting.

Quick Start Guide

Table of Contents