Emerson Rosemount 1066 Quick Start Manual page 2

Quick Start Guide
Safety information
For information on specifications, programming, calibration, and HART
see the Rosemount 1066 Transmitter Reference Manual
Emerson designs, manufactures, and tests its products to meet many national and
international standards. Because these instruments are sophisticated technical products, you
must properly install, use, and maintain them to ensure they continue to operate within
their normal specifications. You must adhere to the following instructions and integrate them
into your safety program when installing, using, and maintaining Emerson's Rosemount
products.
WARNING
Failure to follow the proper instructions may cause any one of the following situations to
occur: loss of life, personal injury, property damage, damage to this instrument, and
warranty invalidation. Unauthorized parts and procedures can affect the product's
performance, place the safe operation of your process at risk, and may result in fire, electrical
hazards, or improper operation.
Read all instructions prior to installing, operating, and servicing the product.
If you do not understand any of the instructions, contact your Emerson representative
for clarification.
Follow all warnings, cautions, and instructions marked on and supplied with the product.
Inform and educate your personnel in the proper installation, operation, and
maintenance of the product.
Install equipment as specified in the installation instructions of the appropriate Quick
Start Guide and per applicable local and national codes. Connect all products to the
proper electrical and pressure sources.
When replacement parts are required, ensure that qualified people use replacement
parts specified by Emerson.
Ensure that all equipment doors are closed and protective covers are in place, except
when maintenance is being performed by qualified people, to prevent electrical shock
and personal injury.
WARNING
Risk of electrical shock
Do not open while the circuit is live.
Only clean with a damp cloth.
NOTICE
If a 475 Universal HART
the 475 may require modification. If a software modification is required, please contact your
local Emerson Service Group or National Response Center at 1-800-654-7768.
2
Communicator is used with these transmitters, the software within
®
communications,
®
at Emerson.com/Rosemount.
Emerson.com/Rosemount
February 2024