Emerson Rosemount 1066 Quick Start Manual page 14

Single channel transmitter

Hide thumbs Also See for Rosemount 1066:

Quick Start Guide

5. The transmitter case has six ½-in. (12.7 mm) conduit openings.

Use separate conduit openings for the power/output cable,

the sensor cable, and the other sensor cable as needed (pH

input for free chlorine with continuous pH correction).

6. Use weathertight cable glands to keep moisture out of the

transmitter. If using a conduit, plug and seal the connections

at the transmitter housing to prevent moisture from getting

inside the instrument.

7. Install cable gland fittings and plugs as needed to properly

seal the transmitter on all six enclosure openings. The USB

port cover must be fully installed on the front cover to ensure

proper transmitter sealing.

1.4

Preparing conduit openings

There are six conduit openings in all configurations of the

transmitter.

Note

Emerson fits four of the openings with plugs upon shipment.

February 2024

Emerson.com/Rosemount

Table of Contents