Emerson Rosemount 1066 Quick Start Manual page 31

February 2024
5. Choose the desired display parameter or diagnostic for each
of the four display sections in the lower screen.
6. Continue to navigate and program all desired screen
selections. Press MENU and EXIT. The screen returns to the
main display.
The default display shows the live process measurement in the upper
display area and the temperature in the center display area. You can
elect to disable the display of temperature in the center display area
using the Main Format function.
3.4 Menu system
The transmitter uses a scroll and select menu system. Pressing the
MENU key at any time opens the top-level menu including Calibrate,
Hold, Program, and Display functions.
To find a menu item, scroll with the up and down keys until the item
is highlighted. Continue to scroll and select menu items until the
desired function is chosen.
To select the item, press ENTER. To return to a previous menu level
or to enable the main live display, press the EXIT key repeatedly. To
return immediately to the main display from any menu level, simply
press MENU and then EXIT.
The selection keys have the following functions:
• The Up key (above ENTER) increments numerical values, moves
the decimal point one place to the right, or selects units of
measurement.
• The Down key (below ENTER) decrements numerical values,
moves the decimal place one place to the left, or selects units
of measurement.
• The Left key (left of ENTER) moves the cursor to the left.
• The Right key (right of ENTER) moves the cursor to the right.
To access desired menu functions, use the Quick Reference Guide.
During all menu displays (except main display format and Quick
Quick Start Guide
Quick Start Guide
31