Switching Off The Machine - Dick SM-110 Operating Instructions Manual

Putting the machine into operation
Switch on the machine as follows:
1. Insert the plug into the socket.
2. Press the I key [9-2] on the main switch.
3. Check the direction of rotation when starting up the machine.
➾
The direction of rotation is given by arrows [10-1] on the covers.
1
Image 10 – Indication of the direction of rotation on the grinding wheels
2

6.7 Switching off the machine

1. Press the 0 key [9-1] on the main switch.
2. Wait until the machine has come to a complete stop.
RISK OF ELECTRIC SHOCK
If the plug is removed from the socket by pulling the power
cable, the connection between the plug and cable can be dam-
aged and is therefore a substantial source of danger.
➾
When disconnecting the power connection, hold onto the
plug, not the cable, and pull it out of the socket.
3. Pull the mains plug out of the socket.
4. Clean the machine
[10-1] Indication of the direction
of rotation on the grinding
wheels
DANGER
Operating instructions, SM-110/-111
6
27