User Information; General; Symbols And Conventions; Instructions - Dick SM-110 Operating Instructions Manual

User Information

1 User Information

1.1 General

These operating instructions are part of the SM-110/-111 knife grinding and
honing machine with the serial number given on the type plate (the type
plate is located on the side underneath the guard).
These operating instructions must be kept within reach near the machine at
all times. They contain important information for the safe, proper and eco-
nomical use of the machine.
These operating instructions must have been read and understood by each
person before this person may carry out the following work using the
machine:
• Putting into operation
• Operation
• Servicing
Avoid dangers and lower repair costs:
➾
The operating instructions must be observed at all times
while working on and with the machine.
The technical information and instructions for use in this operating instruc-
tions are up-to-date and correct on delivery of the machine. Friedr. Dick
GmbH & Co. KG reserves the right to further develop the design and to make
changes without notice.
All directional information refers to the view of the operator.

1.2 Symbols and conventions

1.2.1 Instructions

Sequences of actions, which must be carried out in the given order are spec-
ified as a numbered list:
1. Instruction step 1.
2. Instruction step 2.

1.2.2 Lists

Lists without a particular order that have to be followed are shown as a list
with bullet points or indent markings:
NOTE
Operating instructions, SM-110/-111
1
5