Filling Cooling Water - Dick SM-110 Operating Instructions Manual

6
Putting the machine into operation

6.2 Filling cooling water

2
1
Image 4 – Filling cooling water
[4-1] Clamp
[4-2] Handles for lifting out the
machine
[4-3] Water tank
[4-4] Lateral grinding surfaces
1. Switch off the machine, pull the mains plug.
2. Open the clamp [4-1].
3. Lift the machine from the handles [4-2] out of the water tank [4-3].
4. Fill the left and right chamber of the water tank with 2 to 2.5 cm of water.
Do not fill water into the central chamber.
5. Place the machine onto the water tank.
6. Close the clamp [4-1].
20 Operating instructions, SM-110/-111
3
NEVER GRIND DRY
The water is used for cooling in order to prevent the cutting
edge of the knife overheating during the grinding process.
2
1
3
4
NOTE