Switching On The Belt Grinder - Dick SM-100 Operating Instructions Manual

Putting into operation
7
7.7
Risk of injury due to damaged or incorrectly mounted
machine parts
Using the belt grinder with damaged electric parts or power
cables can cause injuries due to electric shocks or malfunctions.
Damaged grinding belts can be partly spun off the machine.
•
•
Risk of injuries due to poor health of the operator
Lack of concentration, over-tiredness, illness, drunkenness or
leg or arm disabilities, as well as mental disabilities, cause a high
risk of injuries.
•
•
•
Belt grinder SM-100
22

Switching on the belt grinder

Missing or damaged coves expose rotating parts and can
cause injuries due to crushing and drawing in. Check the belt
grinder for damage before each use, in particular:
- the grinding belt,
- the polishing wheel,
- the power cable,
- correct assembly and covering function of all covers and
the housing,
- the function of the switches.
Replace damaged parts before using the belt grinder again.
People who work at the belt grinder must be healthy and
capable of concentrating.
Before starting work at the belt grinder, ensure you are in a
stable position in which you can maintain your balance with-
out any effort.
When grinding and polishing, do not look away from the belt
grinder and workpiece.
WARNING
CAUTION