Servicing And Maintenance - Dick SM-110 Operating Instructions Manual

Knife grinding and honing machine 1-115 v/230 v - 50/60 hz
Table of Contents

Advertisement

8

Servicing and maintenance

8
Servicing and maintenance
34
Operating instructions, SM-110/-111
RISK OF INJURY DUE TO UNAUTHORISED OR
CARELESS SWITCHING ON
If the machine is still connected to the mains during mainte-
nance or repair work, there is a risk of it being switched on
carelessly and causing injury.
Always disconnect the mains plug before carrying out any
maintenance or repair work.
RISK OF INJURY DUE TO INCORRECT SPARE PARTS
Incorrect spare parts can damage the machine or cause parts to
be flung away, potentially causing serious injury.
Use exclusively original spare parts from Friedr. Dick GmbH
& Co. KG.
RISK OF INJURIES DUE TO IMPROPER REPAIR
WORK
Improper repairs may limit or alter the functioning and result in
electric shock or serious injury.
Repair work on electric components may only be carried out
by qualified electricians.
Do not carry out any unauthorised repairs or modifications.
CHECK THAT THE PARTS HAVE BEEN FULLY
INSTALLED
After finishing all repairs and servicing work, check that all
dismantled parts have been completely and correctly installed,
especially the covers.
WARNING
WARNING
WARNING
NOTE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sm-1119 8200 0009 8200 0109 8210 0009 8210 010

Table of Contents