Switching Off The Machine - Dick SM-100 Operating Instructions Manual

Putting the Machine into Operation

6.8 Switching off the machine

1. Press the red button [9-1] at the switch.
2. Wait until the grinding belt, the lamellar grinding wheel and the polishing
wheel come to a standstill.
RISK OF ELECTRIC SHOCK
If the plug is removed from the socket by pulling the power ca-
ble, the connection between the plug and cable can be damaged
and is therefore a substantial source of danger.
When disconnecting the power connection, hold onto the

plug, not the cable, and pull it out of the socket.
3. Pull the mains plug out of the socket.
4. Clean the machine.
RISK OF INJURY DUE TO CARELESS SWITCHING ON
If the machine is left unattended after grinding work, there is a
risk of the machine being switched on by unauthorised/careless
persons.
After carrying out grinding work, never leave the machine

unsupervised unless the mains plug has been disconnected.
Place the machine in a safe location to which unauthorised

persons do not have access.
DANGER
WARNING
Operating Instructions SM-90/-100/-100W
6
27