Intended Use - Dick SM-110 Operating Instructions Manual

4
Safety

4.2 Intended use

• The machines SM-110 and SM-111 are designed for commercial use only
and are not intended for mobile use.
• The machines SM-110 and SM-111 may only be used for grinding and
honing hand knives with a smooth cutting edge. Using corresponding
DICK special accessories, household scissors can also be professionally
sharpened (see 11 Accessories).
• The machines are designed exclusively for use in dry interiors at tempera-
tures between +5 and +30 °C.
• Original spare parts and accessories from Friedr. Dick GmbH & Co. KG
must exclusively be used.
Any other or additional use is deemed to be improper use.
• The machine must not be used, among other things, for grinding materi-
als that produce harmful dusts.
• The machine must not be used for freehand grinding and honing of
unlisted cutting, punching, splitting, chipping, scraping, marking and
sewing tools and equipment, machine knives or dirty abrasive material.
The owner is responsible for any damage caused by improper use.
10 Operating instructions, SM-110/-111
Read operating instructions – indicates that the operating
instructions must be observed, as failure to do so may result in
serious injury or even death.
Disconnect the mains plug – indicates that the mains plug
must be disconnected before any maintenance or similar work
is carried out.
Protect from moisture – indicates that the machine as well as
the abrasive material must be protected from water, moisture
and wetness.
Wear protective equipment – indicates that personal pro-
tective equipment, e.g. hearing protection and safety goggles,
protective gloves or a hair net, must be worn.