Operation - Gira 2399 02 Operating Instructions Manual

Presence detector and motion detector 360° compact
5

Operation

Special functions can be switched and settings adjusted using the supplied PIR 2 IR
remote control.
Special functions can restrict operation via the 2-wire extensions or push-but-
tons.
If multiple devices are within the range of the IR remote control, then align it so
that only the device to be operated can receive the signals.
Inserting the battery
Obey the battery safety instructions.
￭ Keep contacts of batteries and device free of grease.
￭ Insert the supplied battery with correct polarity (see IR remote control imprint).
LED display
Behind the sensor window (4) are a red and a blue LED (see figure 1) for indicating
different states of operation.
Red LED
Off
On
Flashing slowly
Flashing
Off
Button assignment of the supplied PIR 2 IR remote control
Taste
ů
Pressing for less than 0.4 seconds
ů
Actuation of between 1 and 4 seconds
Ű
Pressing for less than 0.4 seconds
ű
Pressing for less than 0.4 seconds
2 h on
Pressing for less than 0.4 seconds
2 h off
Pressing for less than 0.4 seconds
82593232
Blue LED
On
Off
Off
Off
Flashing
25.09.2023
Signalling
Light switched on continu-
ously
Light switched off continu-
ously or twilight button
function activated
Presence simulation
switched on
Receipt of IR signals
IR signal detected
Funktion
Switching on automatic mode
In automatic mode: Switch-on for the dur-
ation of the run-on time
Continuous on
Continuous off
On for 2 hours
Off for 2 hours
7 / 25