Table of Contents
Advertisement
Presence detector and motion detector 360° compact
Connection assignment
black, BK, L
brown, BR, ↓
blue, BU, N
grey, GY, 1
PE
￭
Connect optional push-button (14) (see figure 9) or (see figure 10). This is only
necessary if manual operation is also desired.
Lit push-buttons may only be connected if they have an N connection terminal.
In the case of single devices, a 2-wire extension can be used as an alternative
to the push-button (14).
￭
Screw the sensor cover (2) to connection box (1) with screws (10) and mount-
ing pins (9) (see figure 7).
Limiting the detection field using the push-on cover
The push-on cover can be used to limit the detection field, e.g. in order to mask out
interference sources.
Cover size
Complete push-on cover
82593232
Figure 11: Push-on cover
25.09.2023
Phase conductor
Switched phase conductor
Neutral conductor
Connection push-button
Protective conductor
Range on the ground (mounting height 3
m)
Ø approx. 4.5 m
16 / 25
Advertisement
Table of Contents
