Gira 2399 02 Operating Instructions Manual page 18

Presence detector and motion detector 360 compact
Hide thumbs Also See for 2399 02:
Table of Contents

Advertisement

Presence detector and motion detector 360° compact
ū
Pressing for longer than 10 seconds
Ŭ
Test 100 h
Pressing for less than 10 seconds
Test 100 h
Pressing for longer than 10 seconds
Set 1
Pressing for longer than 10 seconds
ŭ
Pressing for longer than 10 seconds
Prog Func
Reset
Pressing for between 4 seconds and
10 seconds
Reset
Pressing for longer than 10 seconds
Switching on a device function
The device can work either as a motion detector or presence detector.
Press the ū or Ū button.
The device works either as a motion detector or presence detector.
When changing the device function, the settings of the previous device func-
tion are saved and reactivated on changing again.
Setting the sensitivity
The sensitivity can be set individually for each PIR sensor.
Press PIR A, PIR B, PIR C or PIR A-C button for less than 10 seconds.
Within 5 seconds, press the 25%, 50%, 75% or 100% button.
Sensitivity is set.
If no touch-sensitive button is pressed within 5 seconds, the old setting is kept.
Limiting the detection field
The detection field of the motion detector can be limited by switching off one or two
PIR sensors. Since the detection areas of the PIR sensors overlap, there is no dis-
tinct demarcation of the blocked out detection area. If all the PIR sensors have been
switched off, then the device works as a twilight switch.
Press the PIR A, PIR B or PIR C button for longer than 10 seconds.
The appropriate PIR sensor is switched off and the detection field is limited.
Press the PIR A-C button for longer than 10 seconds.
82593232
25.09.2023
Switching on the Motion detector device
function
No function is saved for this device
Switch on test operation
On for 100 hours
Save any changes made for later recall
using the Set 2 button of the supplied IR
remote control
Switch on/off switch-off warning
No function is saved for this device
Switching off the functions: dynamic run-
on time, switch-off prewarning, on for
100 hours, test operation
Restoring to factory settings
18 / 25

Advertisement

Table of Contents
loading

Table of Contents