Presence detector and motion detector 360° compact
Preparations for mounting
(1)
Connection box
(2)
Sensor cover
(5)
Decor ring
(9)
Fastening pins
(10)
Screws
■
Pull off decor ring (5) (see figure 7).
■
Loosen screws (10) (see figure 7).
Installing the connection box
(11)
Fastening holes
(12)
Cable entry, surface-mounted
(13)
Thin points for optional cable entries
■
Align the device (for the position of areas A, B, C, see Aligning the device) –
the brightness sensor should, if possible, be located on the side away from the
window. This reduces the effects of scattered light.
82593232
Figure 8: Connection box
25.09.2023
Figure 7: Mounting
14 / 25