Table of Contents
Advertisement
Presence detector and motion detector 360° compact
Installation
height
3.00 m
3.50 m
4.00 m
5.00 m
6.00 m
1:
Range for tangential movement on the ground
2:
Range for radial movement on the ground
3:
Range for typical movements at desks, e.g. torso movement
4:
Range of fine detection at desks, e.g. mouse movements
*)
When used as a presence detector: Installation height should not be more
than 3.5 m, otherwise fine detection is not possible.
Selecting installation location
For use as a presence detector, the device is installed, for example, above a work-
place and monitors the surface below it. For use as a motion detector, the device is
installed, for example, in the hallway.
￭
Select a vibration-free installation location. Vibrations can lead to unwanted
switching.
￭
Avoid interference sources in the detection field. Interference sources, e.g.
heaters, ventilation, air conditioners, and cooling luminaires can lead to un-
wanted detections.
The detection field can be limited in order to minimise the influence of interfer-
ence sources. For this, use the push-on cover (see Limiting the detection field
with the push-on cover) or switch off individual sensors (see Limiting the de-
tection field).
Aligning the device
The device has three independent PIR sensors for motion detection (see figure 5).
82593232
1:
20.00 m
23.00 m
26.00 m
28.00 m
29.00 m
25.09.2023
2:
3:
16.00 m
12.00 m
18.50 m
14.00 m
17.00 m
14.50 m *)
18.00 m
15.00 m *)
19.00 m
– *)
4:
8.00 m
9.00 m
– *)
– *)
– *)
12 / 25
Advertisement
Table of Contents
