Brake - Manual Release Of The Brake - HAKO Scrubmaster B 120 R Service Booklet

9. Drive
9.3 Brake – manual release of the brake
In order to also move the machine without power supply (no battery installed or other problems
with the drive), the magnetic brake can be unlocked manually.
In order to push the machine, carry out the following steps:
1. Loosen the bolts of the cover to the drive using the supplied socket wrench and remove the
cover.
2. Remove the pin Fig. 9.2-A from the holder and screw it into the ring Fig. 9.2-B.
3. In order to unlock the parking brake, slightly pull the pin upwards Fig. 9.2-C and simultaneously
push the machine.
4. Disassembly is in reverse order.
Figure 9.2
Sheet 77