Mounting The Sensor - Siemens SITRANS F Operating Instructions Manual

4.4

Mounting the sensor

Before mounting
● Verify that accessories such as spring stop, gas/fluid damping are still correctly seated in
● Check that the installation clearance between the flanges of the pipe correspond to the
Mounting the device
● Install the device vertically.
● Ensure that the values displayed on the scale are visible and readable.
● Ensure adequate space for a potential upgrading of the instrument.
SITRANS FVA250
Operating Instructions, 02/2013, A5E03821131-01
the flange.
fitting dimension of the instrument and additionally 2 gaskets.
Installing/Mounting
4.4 Mounting the sensor
21