Table of Contents
Advertisement
DISPLAY
ESITING ERROR
05-00
The key input is not operative as an edit is in progress.
05-01
The key input is not operative as the edit is not complete.
'y
inp
ip
p'
The key input is not operative as the edit points have not been entered.
The current and previous events cannot be reviewed as they have not been edited.
The edit cannot be made as the player VTR side has not been connected.
The edit cannot be made as the recorder VTR side has not been connected.
The servo on the player VTR side is disturbed during the edit.
The servo on the recorder VTR side is disturbed during the edit.
The servo can not be locked on the VTR.
The VTR cannot be controlled during the edit.
05-10
05-11
Colour framing error
Synchronization has not been performed.
05-13
The edit is not possible as the current mode is LOAD/SAVE.
DISPLAY
LOAD/SAVE ERROR
06-00
LOAD/SAVE cannot be executed as an edit is in progress.
06-01
The operation is not possible as the current mode is SAVE.
The operation is not possible as the current mode is LOAD.
06-03
Communication error in loading (data will not be transmitted for more than 3 seconds).
* 06-04
The event number to be toaded is wrong.
06-05
The number of the VTR for the loading operation is wrong.
*
06-06
The preset data for the loading operation is wrong.
06-07
The transition data for the loading operation is wrong.
06-08
The IN point on the player VTR side for the loading operation is wrong.
06-09
The OUT point on the player VTR side for the loading operation is wrong.
06-10
The IN point on the recorder VTR side for the loading operation is wrong.
06-11
The OUT point on the recorder VTR side for the loading operation is wrong.
06-12
The multi-event memory cannot be entered as the edit data has not been completely recorded.
06-13
Cannot be entered as the multi-event memory is full.
06-14
The host can not be operated for more than 3 seconds in the SAVE mode.
~73-
A/B ROLL EDITING ERIROR
DISPLAY
The wrong VTR has been selected.
Audio split recording cannot be performed.
The IN point on the A roll is larger than the OUT point on the A roll.
The recorder has not been connected.
The P-VTR with the A roll has not been connected.
The P-VTR with the 8 roll has not been connected.
The edit data has not been recorded completely.
The switcher AG-SW800 has not been connected.
The contro! switch on the switcher AG-SW800 has been set to "LOCAL".
The mode is not A/B roil editing.
TAKE cannot be performed during the preroll.
Cannot be entered as the edit is now in progress.
The IN point on the A roll is equal to or larger than the OUT point on the A roll.
The IN point on the B rolt is equal to or larger than the OUT point on the B roll.
No change or recording can be done during review.
The duration on the A roll is equal to or larger than the duration of the roll on the recorder VTR side.
The duration on the B roll is equal to or larger than the duration of the roll on the recorder VTR side.
The servo on the A roil is disturbed.
The servo on the B roll is disturbed.
The VTR on the A roll side cannot be controlled.
The VTR on the B roll side cannot be controlled.
Unspecified error
tir 7" tee
Advertisement
Table of Contents
