Panasonic AG-A800 Operating Instructions Manual page 17

Editing controller
Table of Contents

Advertisement

4. Preview
Preview is the rehearsal of the editing before the actual execution of the edit. The segment you wish to edit is not recorded on the
tape.
eProceed to next step if this operation is unnecessary.
*
=
=
i
==
isgez | 88 83 98 32
1S
38 83 83 68
~<a
.
See
Se
Hives) Tere!
a
Hees |
f
I
t=
oo
1) Press the PREVIEW key.
@
when preview has finished, the PREVIEW lamp will go out.
© Press the EDIT STOP key if you want to stop preview
halfway.
Notes
If the edit out point has not been entered when the EDIT
STOP key is pressed, the edit out point will be entered
automatically.
®To cancel the preview during the automatic continuity
editing mode, press the Edit Stop key twice.
The PREVIEW lamp will light up and preview. will start.
eWhen
preview
is executed
during
the
automatic
continuity editing mode, press the PREVIEW key while
holding down the Auto key in step @
When Performing Preview
j
To produce the available effects either the optional AG-SW800 or the AG-RM800 are connected. Then enter the edit points and the
data for the effects at the time of executing preview.
Refer to page 40 to produce the effects when the AG-SW800 is connected.
Refer to page 52 to produce the effects when the AG-RM800 is connected.
.
—25-
5. To Start Editing
After preview is compieted, start editing the event whose number is showiy on the EVENT NO. Display.
@ Press the EDIT key.
The EDIT lamp will light up and the edit will start.
e The next event number that has been entered will be
displayed at the end of editing.
Notes
®Press the EDIT STOP key to stop the editing halfway. If the
edit OUT point has not been entered, the current position of
the tape at which the EDIT STOP key is pressed will be
entered as the edit OUT point.
If not desired, press the STOP key.
eThe Recorder
side IN point of the next EVENT will be
automatically entered as the Recorder side OUT point of the
EVENT.
ja 3
The EDIT !amp will go out once editing of the event has
been completed.
<Operation of the RECORDER during editing>
Preroll
Start of
Point
Editing
Assemble Editing
Editing
Prerolt Time
Postroll
Time
STILL
Insert Editing
Playback
STILL
©The post roll time can be set with the DIP Switches.
-26-

Advertisement

Table of Contents
loading

Table of Contents