Table of Contents
Advertisement
Set the transition time.
Press the TRAN key to set the transition time (0~999) with the numeric
keyboard. Then press the Enter key.
Repeat from first step and enter both points of P IN and A/B
The setting is finished.
Set the automatic mode with the Auto key.
AUTO ON:
The Take key can be used to switch the switcher. The edit
point will be set when the Take key is pressed.
AUTO OFF: The switcher can be switched using the Take key. The edit
points cannot be entered.
The editing will start from the bus A. If the fade-in effect has been selected for
the P IN point, the effect will be produced on the bus A.
Press the Take key on the AG-A800 at the desired point.
If the special effect has been selected for the A/B point, the effect will be
produced from bus A to bus B.
Press the Edit Stop key to stop the editing.
The editing operation will stop and the OUT point will be entered.
Refer to page 48 if you wish to produce the Down Stream keyer effect.
Refer to page 50 if you wish to produce the special audio effect.
~ 45-
Refer to page 51.
@ Enter alt the edit points
Refer to page 20, 30, 32 for the procedure of entering edit
points.
oe Select the desired points in which you wish to produce the
special effects.
© Press the DIS key.
. © Type the number of the desired dissolve pattern on the
numeric keyboard for the P IN and P OUT points.
0:
Fading in froma
black screen (fading out into a black
screen).
1:
Fading in from a white screen (fading out into a white
screen).
®A dissolve pattern does not have to be set if the A/B key
has been selected in step @.
Notes
@ Press the Enter key.
The selected dissolve pattern will appear on the pattern
display.
P——— switcHen ComTrot
tamwution
Pat vem
ann
"]
[ees] [oy
@ Press the TR.AN key.
e
Input the transsition time using the numeric keyboard.
*The transition time is set in frame units from 0 to 999 (1
frame=1/25- seconds).
3) Press the Enter key.
The transition time will appear on the pattern display.
The dissolve effect is produced.
Swit cHen COMTIOL ———y
Feanesation
rarity
soo] [ee
lf you wish to choose another pattern or modify the transition time, input the desired pattern number or transition time by pressing
the DIS or TRAN key and then press the Enter key.
*if frame 0 is set as the transition time, the cut effect will be produced.
=.452
Advertisement
Table of Contents
