Table of Contents
Advertisement
AROLL
Ee
(-], em] Gay
fh
ad
—_ Me
BROLL
+
'
KEY
po
RECORDER
(ZZ
TTL LLL
PIN
OSK IN
A/B
DSK OUT
P OUT
1) Adjusting the Down Stream Keyer
You can adjust the hues of the chracters generated by the character generator or the luminace of the video picture from the video
camera.
@ Enter all the edit points.
© Press the Enter key. The pattern number will appear on the
'
Refer to the edit point entry procedure on page 20, 30, 32.
pattern display.
SWITCHER
CONTROL ——y
@ Press the A/B key.
cos
@ Press the TRAN key.
oe Press the Wipe key.
C1 Set the control switch to LOCAL.
C3) Adjust the chrominance and brightness with the cofour
@ Set the transition time using the numeric keyboard.
a
tate
control.
The transition time is set in frame units from 0 to 999 (1
ee
HUE:
To adjust the hue.
freme=1/25 seconds).
| ry
SAT:
To adjust the colour saturation. if the control is
turned clockwise, the saturation of the hues in the
four picture can be changed.
© Press the Enter key.
ree.
colour
i
a t s
t e
@ Type the number of the wipe pattern you desire on the
The transition time will appear on the display.
:
LUM:
To adjust the brightness of the video picture. If the
numeric
keyboard. Refer t
41
control is turned clockwise, the video picture wilt
ante Rey
pha
ae
a
jena comp
@ Adjust
the video pictures with the KEY input Level control.
brighten.
Adjust the control so that the Key Input video signals
(characters or pictures) will be displayed on the monitor.
oe Set thee control switch to "REMOTE",
When
rotated clockwise
from
its centre ctlick-stop
The
above
procedures
can
be performed
on the
position,
the
white
areas
are
inserted;
when
rotated
AG-R M800 if it is connected.
*
Notes
counterclockwise, the black areas are inserted.
*If you wish to choose another pattern or modify the transition time, input the desired pattern number or transition time
by pressing
_
the WIPE or TRAN key and then press the Enter key.
a
*If frame 0 is set as the transition time, the cut effect will be produced.
~47—
=
_ AR —
Advertisement
Table of Contents
