Panasonic AG-A800 Operating Instructions Manual page 34

Checking Edit Point Data
Once the entry of edit points has finished, both displays for the RECORDER and PLAYER will show the positions of the tapes
in the VTRs.
You can check each edit point by pressing the following keys: IN, A OUT, B IN and OUT.
© Checking the PLAYER and RECORDER Edit Points
The edit points will be shown on the displays for the PLAYERs and RECORDER.
[Sone BAAE
mam 2) Be iu ue
IN key .............2008. To check the IN points of the PLAYER and RECORDER.
in the A/B Roll editing mode, to check the IN point of the A Roll.
A OUT key.............. To check the OUT point of the A Roll in the A/B Roll editing mode.
BIN key..... Serer To check the IN point of the B Roll in the A/B Roll editing mode.
OUT key ..... sie Seiebares: To check the OUT points of the PLAYER and RECORDER.
tn the A/B Roll editing mode, to check the OUT point of the B Roll.
© Checking the Edit Points in the Audio Split Entry Mode
The edit points will be shown on the display for the PLAYER.
Press the AUDIO SPLIT key to set the unit to the AUDIO SPLIT
entry mode. The corresponding lamp will light up.
If the key is pressed again, this mode will be cancelled and the
lamp will go out.
UN OY sisi s Sees eccind's To check the AUDIO IN point.
A OUT or B IN key ...... To check the OUT point of the A Rol! or the IN point of the B Roll in the A/8 Roll editing mode.
OUT key .............8. To check the OUT point.
Checking the Time Duration of an Edit
Press the DUR key ----+-+eeeee ere eeeee es The time duration will be shown on the PLAYER and RECORDER dispiays.
© Inthe A/B Roll editing mode, the disptay will switch depending on the setting of the VTR Selection Switch.
RECORDER Display
The time duration for the recorder és displayed.
VTR selection switch setting PLAYER Display
A key (RECORDER)
No display
P1, P2 or AUX key (A ROLL VTR)
The time duration of roti A is displayed. The time duration for the recorder is displayed.
P1, P2 or AUX key (B ROLL VTA)
The time duration of roll B is displayed. The time duration for the recorder is displayed.
rn
t
Checking the Edit Data of Several Cuts
® Follow the steps below when using the PLUS (+) or MINUS (—) key.
@ Press the PLUS or MINUS key together with the EVENT key.
@ The event number wiil increase by one on the display each time the PLUS key is pressed.
The event number will decrease by one each time the MINUS key #s presse-d.
AC EC CO
Twice The current Twice
— key - se EVENT Number : ac + key
The event numbers which have not been entered will not be displayed (in the example above, 30 and 40 have not been entered).
@ Check the edit data with the IN, A OUT, B IN, OUT keys.
Follow the steps shown below when using the numeric pad.
Press the EVENT key
Enter the desired EVENT Number using the 10 key Numeric Pad
+——— The EVENT Number will be displayed.
Press the ENTER key
Check the Edit Data by pressing the
IN, A OUT, B IN and OUT keys.
Checking the Range of events to be Edited Automatically
The unit allows you to check the range of the events that will be edited automatically.
The event numbers will be displayed when the ~, IN and OUT keys are kept d epressed.
Press the ~ key — The first event number will be displayed on the Player display.
The last event number will be displayed on the Recorde r display.
gary