Panasonic AG-A800 Operating Instructions Manual page 35

Changing Edit Data &
Edit point adjustment using the + or — key
| Enter the EVENT Number to be changed |
:
[ setect the PLAYER or RECORDER |
Press the + or — key together with any necessary
key IN, A OUT, B IN and OUT keys and make the
necessary number adjustment. -
® The number will change by one frame each time the +/—
keys are pressed.
© It is recommended to delete edit process data and re-enter it when it is necessary to change large portions of this data.
Note: The record point calculated automatically internally can not be adjusted using the — and + keys.
The edit OUT point of the RECORDER which has automatically been entered after the entry of IN/OUT points of the
PLAYER and the IN point of the RECORDER cannot be changed.
IN out
PLAYER h
" : - This point can be jie
RECORDER k t
The OUT point cannot be changed.
if the IN and OUT point of the RECORDER is entered at the primary stage and then changed at the OUT point of the RECORDER,
the OUT point data of the PLAYER will change automatically but the IN point data of the RECORDER will not be changed.
Changing the edit point using the 10 key Numeric Pad
For adjustment with the +/— key
@ Select the edit point to be changed by pressing the IN, A OUT, B
iN and OUT keys after selecting the event number and the
PLAYER or RECORDER.
@ Press the + or — key.
@ Enter the increased or decreased number to be corrected
using the 10 key Numeric Pad. :
@ Press the ENTER key.
For inputting new data
@ Select the edit point to be changed by pressing the IN, A
OUT, B IN and OUT key after selecting the event number
and the PLAYER or RECORDER.
@ Enter the correct data using the 10 key numeric pad.
@© Press the ENTER key.
Changing the KEY effect data etc.
Enter the new data that is required.
Note : e y sa
If the Edit data is changed with Automatic continuity editing, the edit data list must be modified. Refer to page 64.
~6i-
Deleting Edit Data
Edit data deletion
® To delete the edit points in an event, etc.
* To delete ail the data entered in an event
Enter the EVENT Number to be deleted , [Enter the EVENT Number to be deleted]
|
Select the VTR. [ Press the EVENT key |
Select the Edit Point to be deleted by pressing the Press the C (CLEAR) key
Lee | and the ENTER key together
IN, A OUT, B IN and OUT keys
(TRAN, PATTERN key, etc.)
Press the C (CLEAR) key
and the ENTER key together
© To delete the edit points of all the events
| Press the EVENT key |
| Enter "9999" using the 10 key Numeric Pad |
|
Press the AUTO key and
the ENTER key together
Note
Enter the new data with the multi edit data list to modify the edit data list, refer to page 64.
© To cancel the range of automatic continuity editing
| Press the ~ key
Press the ENTER key while
holding down the C key ,
— 62-