Fip-240 - H3C SR6604-X Manual

Available interface modules
Table2-9 Maximum number of MIMs and HIMs supported by routers fully configured with
FIP-240 modules
FIP/Interface module

FIP-240

MIM
HIM
FIP-300
The FIP-300 supports HIMs and MIMs, and it provides 12 combo interfaces.
Front panel
Figure2-6 FIP-300 front panel
(1) HIM/MIM slot
(3) GE0 through GE11 fiber ports
Technical specifications
Item
Memory type and size
NVRAM
Combo interface
HIM
MIM
MIC
Hardware encryption
Hot swapping
SR6604-X
2
8
4 (8 half-height HIMs)
1
Specification
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
The SDRAMs must be used in pairs and must be the same size.
Install the DDR3 SDRAMs in subslots 1 and 3 in the rear of the FIP module.
128 KB
12
Copper ports (MDI/MDIX
autosensing)
Fiber ports
1
1
Not supported
Supported
Supported
2-9
SR6608-X
4
16
8 (16 half-height HIMs)
2
3
(2) GE0 through GE11 copper ports
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
SR6616-X
8
32
16 (32 half-height HIMs)