H3C SR6604-X Manual page 45

Figure3-6 FIP-600 status LED
1
Table3-3 FIP-110/FIP-210/FIP-240/FIP-600 LED description
LED
1
(yellow/green)
2
(green)
3
(yellow/green)
FIP-300 LEDs
Figure3-7 FIP-300 status LED
2
3
Status
Off
Steady green
Status LEDs
Flashing green
for GE 0 to
GE 1
Steady yellow
Flashing
yellow
Off
Slow flashing
(1 Hz)
RUN
Fast flashing
(8 Hz)
Off
Steady green
Status LEDs
for SFP 0 to
Flashing green
SFP 1
Steady yellow
Description
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100 Mbps.
No power input is available or the FIP has failed.
The FIP is operating correctly.
System software is being loaded.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the FIP while the system
software is being loaded.
No link is present.
A link is present.
Data is being sent or received at 1000 Mbps.
The transceiver module failed the self-test of the
router.
1
3-4
2
3