H3C SR6604-X Manual page 50

Figure3-13 SAP-4EXP LEDs
Table3-10 SAP-4EXP LED description
LED
RUN
1
(green)
Status
LEDs for
2
SFP+ 0 to
(yellow/green) SFP+ 3
Figure3-14 SAP-20GE2XP LEDs
5
Table3-11 SAP-20GE2XP LED description
LED
RUN
1
(green)
2
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
Steady yellow
4
Status
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
3-9
Description
No power input is available or the SAP-4EXP has
failed.
The SAP-4EXP is operating correctly.
System software is being loaded or the SAP-4EXP
is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-4EXP when
system software is being loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10 Gbps.
The transceiver module failed to be detected.
3 2
Description
No power input is available or the SAP-20GE2XP
has failed.
The SAP-20GE2XP is operating correctly.
System software is being loaded or the
SAP-20GE2XP is not operating.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the SAP-20GE2XP
when system software is being loaded.
1
1