Sap-28Ge - H3C SR6604-X Manual

SAP-28GE

Front panel
Figure2-15 SAP-28GE front panel
(1) SFP ports (GE0 to GE15)
(3) Operating status LED (RUN)
Technical specifications
Item
Memory type and size
NVRAM
SFP ports
Combo interfaces
Hot swapping
Fixed Ethernet port specifications
Table2-22 SFP port specifications
Item
Connector type
Transceiver module type
Network synchronization
1588v2.2 protocol
Interface standards
Operating mode
Table2-23 Combo copper port specifications
Item
Connector type
Interface type
Frame format supported
1
Specification
•
Default—Two 2-GB DDR3 SDRAMs.
•
Maximum—Four 2-GB DDR3 SDRAMs.
The SDRAMs must be used in pairs and must be the same size.
128 KB.
16 × SFP ports, 100/1000 Mbps auto-sensing.
12.
•
Copper port—Straight-through/crossover autosensing:
10/100 Mbps, half/full-duplex.

1000 Mbps, full-duplex.

•
Fiber port—1000 Mbps, full-duplex.
Supported.
Specification
LC
SFP
Supported
Supported
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
Specification
RJ-45
Auto MDI/MDI-X
•
Ethernet_II
2-19
2
(2) Combo interfaces (GE16 to GE27)
3