H3C SR6604-X Manual page 47

LED
Status LEDs
for SFP 0 to
2 SFP 3
(yellow/green)
3
RUN
(green)
Status LEDs
for SFP+ port
4
0 and SFP+
port 1
(yellow/green)
Figure3-9 FIP-680 LEDs
Table3-6 FIP-680 LED description
LED
SFP1
through
1
SFP12
(green)
SFP+1
2 through
SFP+4
(green)
GE13
through
3
GE20
(yellow/green)
Status
Off
Steady green
Flashing green
Steady yellow
Off
Slow flashing (1 Hz)
Fast flashing (8 Hz)
Off
Steady green
Flashing green
Steady yellow
1 2
Status Description
Off No link is present.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Off No link is present.
Steady green A 10 Gbps link is present.
Flashing green Data is being received or transmitted at 10 Gbps.
Off No link is present or the port is faulty.
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 10/100 Mbps.
3-6
Description
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
The transceiver module has failed the POST.
No power input is available or the FIP has
failed.
The FIP is operating correctly.
System software is being loaded.
CAUTION:
To avoid hardware damage, do not power off
the router, or insert or remove the FIP while the
system software is being loaded.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10
Gbps.
The transceiver module has failed the POST.
3
4