H3C SR6604-X Manual page 17

console port. For more information, see H3C SR6604-X/SR6608-X/SR6616-X Routers Installation
Guide.
Table2-2 AUX port specifications
Item
Connector
Compliant standard
Baud rate
Supported service
NOTE:
The dialup function for an AUX port is supported only on Comware 5. For MPU and Comware
compatibility, see
Management Ethernet port
The management Ethernet port is a 10Base-T/100Base-TX/1000Base-T autosensing RJ-45 port. It
allows you to upgrade software and manage the router through a network management server
without using any service interface of the router. The management Ethernet port is used only for
managing the router and it has no service processing capabilities such as data forwarding.
Table2-3 Management Ethernet port specifications
Item
Connector
Interface type
Ports
Supported frame format
Interface speed and duplex mode
Transmission medium and maximum transmission
distance
NOTE:
The media dependent interface (MDI) standard is typically used on the Ethernet port of network
adapters. The media dependent interface crossover (MDI-X) standard is typically used on hubs or
LAN switches.
Reset button
CAUTION:
• If you perform no save operation before resetting the router, the current system configuration will
be lost.
• To prevent damage to the file system, never press the RESET button when the RUN LED is
flashing fast or when the router is accessing the CF card or a USB storage device.
To reset the current MPU, press the RESET button.
Specification
RJ-45
Asynchronous EIA/TIA-232
9600 bps (default) to 115200 bps
Connects to the serial port of a local PC or to a remote PC through dialup
connection (using a pair of modems at the two ends)
"MPU and Comware compatibility matrix."
Specification
RJ-45
MDI/MDIX autosensing
1
Ethernet_II
Ethernet_SNAP
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
Crossover, category-5 twisted pair cable, with a
maximum transmission distance of 100 m (328.08 ft)
2-3