Labels & Cosmetics (Front) - Grizzly EXTREME Series Owner's Manual

Labels & Cosmetics (Front)
101
G0965
109
Max. Receptacle Load: 7A
102
108
REF PART # DESCRIPTION
101 P0965101 MODEL NUMBER LABEL
102 P0965102 ELECTRICITY LABEL
103 P0965103 AIR PULSE LABEL
104 P0965104 COMBO WARNING LABEL
105 P0965105 MACHINE ID LABEL
Model G0965 (Mfd. Since 04/23)
WARNING!
INJURY HAZARD!
Do not open door
while machine is
connected to power
or impeller is in
motion.
107
106
REF PART #
106 P0965106
107 P0965107
108 P0965108
109 P0965109
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
103
104
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
WARNING!
102
WARNING!
FIRE/EXPLOSION
HAZARD!
Do not use machine
to collect
combustible or
explosive metals.
Specifications
WARNING!
Motor: 2 HP, 230V/460V, 3-Phase, 60 Hz To reduce risk of serious personal injury when using this machine:
Prewired Voltage: 230V 1. Read and understand owner's manual before operating.
Full-Load Current Rating at 230V: 6.6A 2. Always wear approved eye protection and respirator and any additional personal
Full-Load Current Rating at 460V: 3.3A protective equipment required by operation and attachment tools.
Auxiliary Power Req.: 120V, 1-Phase, 60 Hz 3. Only plug power cord into a grounded outlet.
Max. Auxiliary Full-Load: 7A 4. Never use machine to collect combustible or explosive metal dust (such as
Table Size: 35-5/8" x 44" aluminum or magnesium), wood chips, sawdust, or other ordinary combustible
Table Load Capacity: 1543 lbs. materials!
Air Suction Capacity: 1350 CFM 5. Always disconnect power and bleed air from air components before servicing or
Filter 1: Spark Arrestor, Aluminum Mesh cleaning, and make sure impeller stops before opening door or removing covers.
Filter 2: 0.2–2 Microns @ 95%, Canister Filter 6. Do not exceed air supply rating or maximum weight capacity.
Filter 3: 0.3 Microns @ 99.99%, HEPA Filter 7. Monitor pressure gauge, and replace filters when gauge exceeds 6 inAq.
Filter Replacements: T33835, T33836, T33837 8. Handle used filters carefully, and follow EPA guidelines for disposal.
Max. Air Supply Pressure: 90 PSI 9. Keep hands, long hair, and loose clothing away from inlet.
Air Input Connection: 1/4" NPT Industrial 10. DO NOT adjust or remove air safety relief valve, modify machine, or use without
Air Output Connection: 1/4" NPT Industrial filters in place.
Weight: 776 lbs. 11. Always use a brush or vacuum to clear metal chips or dust; DO NOT use your
hands, rags, or compressed air.
12. Inspect compartments after use for fire hazards and smoldering combustibles.
13. Never leave machine unattended during operation.
14. DO NOT expose to rain or use in wet locations.
15. Do not use if cord, plug, or any other electrical equipment becomes
damaged—promptly repair!
16. Inspect air supply components for damage, leaks, weakness, looseness, or
excessive wear. Repair/replace defective items before attaching air supply.
17. Drain moisture from air tank after each use and promptly replace a damaged tank.
DO NOT attempt to weld on, modify, or repair tank.
18. DO NOT operate under influence of drugs or alcohol, or if tired.
19. Prevent unauthorized use by children or untrained users; restrict access or
disable machine when unattended.
105
DESCRIPTION
GRIZZLY LOGO PLATE
CLOSE DOOR LABEL
EXTREME SERIES LABEL
MAX LOAD LABEL
-51-