Lifting & Placing - Grizzly EXTREME Series Owner's Manual

Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Before lifting the machine, refer to Needed for
Setup and gather all listed items. Use a forklift to
lift the machine off the pallet.
To lift and place machine:
1. Remove top and sides of crate from shipping
pallet, then remove any small components
and packing materials from pallet.
2. Move pallet and machine to prepared location.
3. Carefully place forklift forks under machine
(see Figure 18).
Figure 18. Lifting locations.
-22-
HEAVY LIFT!
4. Lift machine just enough to clear pallet, then
remove pallet.
5. Lower machine to ground.
6.
Move machine to desired location, then adjust
feet out of machine base until casters no lon-
ger touch floor (see Figure 19), then adjust
them until machine is level.
Adjustable
Caster
Foot
(1 of 4)
(1 of 4)
Figure 19. Location of adjustable feet and
casters.
7. Without moving feet, adjust hex nuts on feet
against machine base to secure.
Model G0965 (Mfd. Since 04/23)