Draining Condensation; Emptying Dust Tray & Dust Drawer - Grizzly EXTREME Series Owner's Manual

Draining
Condensation
Some water may accumulate in the air tank
and fittings depending on usage and humidity.
Drain condensation from these components daily
to increase their lifespan and to prevent tank
corrosion.
To drain condensation:
1.
DISCONNECT MACHINE FROM POWER
AND AIR!
2.
Place end of drain valve hose in bucket or
other collection container.
3.
Move drain valve handle to open drain valve
and drain condensation (see Figure 45).
Drain Valve
Figure 45. Drain valve handle open.
Model G0965 (Mfd. Since 04/23)
Handle
Emptying Dust Tray
& Dust Drawer
Empty the dust tray and drawer at the end of the
day's use. Do not store the dust near heat or any-
thing likely to produce sparks, as some types of
metal dust can be flammable.
If you are not disposing of the collected metal dust
immediately, keep it in an approved, closed-top
metal container stored away from fire hazards
until you are ready to do so.
Wear safety goggles, respirator, and
protective gloves rated for operational fumes
and waste metal type when removing filters,
tray, and drawer. Empty only into approved
container, taking care to minimize amount
of dust allowed to become airborne, and
prevent spread onto hands and clothing.
Items Needed
ANSI-Approved Safety Goggles ...................1 Pr.
NIOSH-Approved Respirator ............................. 1
Protective Gloves..........................................1 Pr.
Vacuum Cleaner w/HEPA Filter ......................... 1
To empty dust tray and drawer:
1.
DISCONNECT MACHINE FROM POWER
AND AIR!
If you have just turned machine OFF, wait
a few minutes for dust inside machine
to settle before proceeding with following
steps.
2.
Put on personal protective equipment.
3.
Pull (2) maintenance door handles to open
maintenance door.
Qty
-35-