Inventory - Grizzly EXTREME Series Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Main Inventory (Figure 15)
A. Downdraft Table ......................................... 1
A
Figure 15. Main inventory.
-20-
Loose Items (Figure 16)
B. HEPA Filter ................................................. 1
C. Filter Cage .................................................. 1
D. Knob Bolts
E. Fender Washers
Qty
⁄ "-20 x ⁄ " ............................. 12
1 3
4 4
⁄ " .................................. 12
1
4
B
C
D
E
Figure 16. Loose items.
Model G0965 (Mfd. Since 04/23)
Qty