Labels & Cosmetics - Grizzly T32428 Owner's Manual

101
T32428
102
To reduce risk of serious injury when using this roller system:
1. Read and understand owner's manual before using.
2. Always wear ANSI-approved eye protection and a respirator.
3. Avoid pinch points when folding roller system.
4. Do not wear loose clothing, gloves, jewelry, or other items that can get
entangled. Tie back long hair and roll up sleeves.
5. Before starting, ensure machine is stable, and system is firmly mounted.
Date SN
6. Make sure power is disconnected before adjusting roller system.
Manufactured for Grizzly in China 7. Plan cuts so workpieces always remain supported.
103
grizzly.com
REF PART # DESCRIPTION
101 PT32428101 LEFT CAM LABEL
102 PT32428102 QR CODE LABEL
103 PT32428103 MACHINE ID LABEL
104 PT32428104 TOUCH-UP PAINT, GRIZZLY BLACK
105 PT32428105 MODEL NUMBER LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this equipment MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM!
-20-
Scan QR code to visit our Parts Store.
Labels & Cosmetics
T32428 Machine Labels
Date
Manufactured for Grizzly in China
104
grizzly.
PINCH HAZARD!
Keep hands away from
hinge areas when
folding roller system.
***
109
108
T32428
***
107
Note: Labels marked with *** must have individual
letters/numbers. DO NOT print with clear background.
(12/16/21)
105
T32428
SN
REF PART # DESCRIPTION
106 PT32428106 RIGHT CAM LABEL
107 PT32428107 GRIZZLY.COM LABEL
108 PT32428108 TOUCH-UP PAINT, GRIZZLY GREEN
109 PT32428109 PINCH HAZARD LABEL
Model T32428 (Mfd. Since 11/21)
To reduce risk of serious injury when using this
1. Read and understand owner's manual before
2. Always wear ANSI-approved eye protection a
3. Avoid pinch points when folding roller system
4. Do not wear loose clothing, gloves, jewelry, o
entangled. Tie back long hair and roll up slee
5. Before starting, ensure machine is stable, and
6. Make sure power is disconnected before adju
7. Plan cuts so workpieces always remain supp
106