Labels & Cosmetics - Grizzly G0708 Owner's Manual

100V2
Specifications
Motor: 1.5 HP, 120V, 1-Ph, 60 Hz
Full-Load Current Rating: 11A
Air Pressure Range: 60–120 PSI
Air Volume Required: 5–35 CFM
Abrasive Media Capacity: 200 lbs.
Abrasive Media Type: Glass Beads, Silicon
Carbide, Emery, Plastic Beads, Sand
Glove Height above Floor: 43"
Weight: 276 lbs.
Date
Serial Number
Manufactured for Grizzly in China
106
WARNING!
AIR PRESSURE
HAZARD!
DO NOT exceed
125
PSI
when using this
product.
G0708
110
111
grizzly.com
105V2
REF PART # DESCRIPTION
100 P0708100 MACHINE ID LABEL
101 P0708101 READ MANUAL LABEL
102 P0708102 GLASSES/RESPIRATOR LABEL
103 P0708103 DISCONNECT AIR/POWER LABEL
104 P0708104 DUST WARNING LABEL
105V2 P0708105V2 GRIZZLY.COM LABEL V2.01.15
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-40-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
MODEL G0708
24" X 48" BLAST CABINET
WARNING!
To reduce the risk of serious injury when using this
machine:
1. Read and understand owner's manual before
operating sandblaster.
2. Always wear approved eye protection and
NIOSH-approved respirator.
3. Keep cabinet leak free, and replace door seals as
required.
4. Unplug air supply when loading, unloading, or
servicing cabinet.
5. Keep all doors closed except for service. 101
6. Replace worn nozzles, jets, or gloves immediately.
7. Clean dust collection system and filters frequently.
8. Never operate sandblaster over 125 PSI.
9. Never sandblast in environment where flammable
gasses or liquids are present or nearby.
10. Never point sandblaster nozzel at hands or face.
11. Do not modify machine in any way.
12. Do not expose to rain or dampness.
WARNING!
13. Do not operate under influence of drugs or alcohol.
14. Prevent unauthorized use by children or untrained
To reduce risk of death
users; restrict access or disable machine when
or serious injury, read
unattended.
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
104
102
108
CANISTER PLUNGER
WARNING!
PUSH IN, THEN RELEASE RAPIDLY
EYE/LUNG INJURY
TO KNOCK DUST LOOSE FROM
HAZARD!
THE FILTER CARTRIDGE.
Always wear safety
glasses and a
Filter cartridge should be cleaned with
respirator when
using this machine.
compressed air after every 5 hours of
operation. See Owner's Manual for more
information on this procedure.
NOTICE
• Recommended Operating Air Pressure is 80 PSI.
• Clean dust collector cartridge regularly. Blow air
through the cartridge from the inside out.
• Check and drain the moisture trap regularly.
• With every use, inspect gloves and hoses for leaks.
Replace worn or damaged parts as needed.
• With every use, inspect spray hose for soft spots.
Replace worn or damaged parts as needed.
• Do not over-fill the hopper. Periodically drain the
hopper completely and refill with new media.
• Every three months, perform a full inspection on all
fittings, gun parts, hoses, and cartridge filter. Replace
worn or damaged parts as needed.
103
Troubleshooting
If flow of media is obstructed, check metering valve and
media hose for obstructions. Blow compressed air back
through gun and hoses to free any clogs. If flow of
media begins, then stops again, drain and replace all
media. Disassemble and clean the gun, hoses, and
metering valve, then reassemble. If air still does not
flow, drain and clean moisture trap. See Owner's
manual for more troubleshooting information.
109
REF PART # DESCRIPTION
106 P0708106 AIR PRESSURE HAZARD LABEL
108 P0708108 FILTER CLEANING LABEL
109 P0708109 GENERAL WARNING LABEL
110 P0708110 MODEL NUMBER LABEL
111 P0708111 GRIZZLY TOUCH UP PAINT - BLACK
112 P0708112 GRIZZLY TOUCH UP PAINT - GREEN
Model G0708 (Mfd. Since 12/23)
112
WARNING!