Labels & Cosmetics - Grizzly G0714 Owner's Manual

• Recommended Operating Air Pressure is 80 PSI.
• Clean dust collector cartridge regularly. Blow air
through the cartridge from the inside out.
• Check and drain the moisture trap regularly.
• With every use, inspect gloves and hoses for leaks.
Replace worn or damaged parts as needed.
• With every use, inspect spray hose for soft spots.
Replace worn or damaged parts as needed.
• Do not over-fill the hopper. Periodically drain the
hopper completely and refill with new media.
• Every three months, perform a full inspection on all
fittings, gun parts, hoses, and cartridge filter. Replace
worn or damaged parts as needed.
If flow of media is obstructed, check metering valve and
media hose for obstructions. Blow compressed air back
through gun and hoses to free any clogs. If flow of
media begins, then stops again, drain and replace all
media. Disassemble and clean the gun, hoses, and
metering valve, then reassemble. If air still does not
flow, drain and clean moisture trap. See Owner's
manual for more troubleshooting information.
REF PART # DESCRIPTION
201 P0714201 MACHINE ID LABEL
202 P0714202 MODEL NUMBER LABEL
203 P0714203 AIR PRESSURE HAZARD LABEL
204 P0714204 DISCONNECT WARNING LABEL
205 P0714205 NOTICE/TROUBLESHOOTING LABEL
206 P0714206 DUST HAZARD WARNING LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-44- BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
WARNING!
206
NOTICE
205
Troubleshooting
204
WARNING!
203
WARNING!
AIR PRESSURE
HAZARD!
DO NOT exceed
125
PSI
when using this
product.
202
Specifications
Motor: 1.5 HP, 110V, 1-Ph, 60 Hz
Full-Load Current Rating: 11A
Max. Air Pressure: 125 PSI
Air Volume Required: 5–35 CFM
Abrasive Media Type: Glass Beads,
Silicon Carbide, Emery, Plastic, Sand
Weight: 352 lbs.
Date
S/N
Mfd. for Grizzly in China
207
WARNING!
AIR PRESSURE
HAZARD! WARNING!
DO NOT exceed
125 EYE / FACE / LUNG
PSI
when using this INJURY HAZARD!
product.
Always wear a face
shield and a
respirator when
203
using this machine.
208
210
212
201
MODEL G0714
INDUSTRIAL BLAST CABINET
WARNING!
To reduce the risk of serious personal injury while using
this machine:
1. Read and understand manual before using machine.
2. Always wear approved eye protection and NIOSH-approved
respirator.
3. Keep all guards in place at all times, and make sure cabinet
remains sealed.
4. Operate machine only when stable and on flat, level ground.
5. Disconnect air supply and power before loading and unloading
workpiece, changing blast tips, and prior to servicing,
maintaining, or adjusting machine.
6. Do not operate under influence of drugs or alcohol, or if tired.
7. Prevent unauthorized use by children or untrained users.
REF PART # DESCRIPTION
207 P0714207 GRIZZLY.COM LABEL
208 P0714208 GOGGLES/RESP. WARNING LABEL
209 P0714209 PLUNGER INSTRUCTION LABEL
210 P0714210 READ MANUAL LABEL
211 P0714211 PINCH HAZARD LABEL
212 P0714212 TOUCH-UP PAINT, GRIZZLY RED
Model G0714 (Mfd. Since 05/22)
WARNING!
204
209
CANISTER PLUNGER
PUSH IN, THEN RELEASE RAPIDLY
TO KNOCK DUST LOOSE FROM
THE FILTER CARTRIDGE.
Filter cartridge should be cleaned with
compressed air after every 5 hours of
operation. See Owner's Manual for more
information on this procedure.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
211
PINCH HAZARD!
Keep hands away
from door opening
and use the
handles when
closing the door.