Controls & Components - Grizzly EXTREME Series Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Table Components
A
C
Figure 1. Table components.
A. Side Door (1 of 2): Contains sparks, fumes,
and dust produced by operation so they can
be drawn into filter compartment by impeller.
Doors can also be opened to allow for larger
workpieces.
B. Work Light: Illuminates table for better vis-
ibility. Requires auxiliary power connection.
C. Grated Table: Provides work surface and
⁄ " mounting holes for clamps and jigs. Table
5
8
removes for cleaning and maintenance.
D. Grounding Lug: Provides easy-access
connection point for grounding table during
welding operations.
-4-
manual BEFORE
B
D
Controls & Pressure Gauge
E
G
H
Figure 2. Power and pneumatic controls and
pressure gauge.
E. Pressure Gauge: Displays vacuum pres-
sure, indicating soil level of filters. Use pneu-
matic cleaning system daily to clean can-
ister filters. Remove and clean canister fil-
ters when operating pressure exceeds 6
inAq. Replace filters when cleaning does not
improve performance.
F. AIR PULSE CLEAN Button: Pulses com-
pressed air to clean canister filters.
G. ON Button: Turns power to motor ON.
H. OFF Button: Turns power to motor OFF.
Auxiliary Power
Figure 3. Auxiliary power components.
I. 120V Outlet:
connection for hand-held tool with full-load
current rating of up to 7A.
Model G0965 (Mfd. Since 04/23)
F
I J
K
Provides 120V power