Grizzly T32428 Owner's Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Industrial Equipment
  5. T32428
  6. Owner's manual

Grizzly T32428 Owner's Manual

37" bear roll outfeed system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL T32428
37" BEAR ROLL
OUTFEED SYSTEM
OWNER'S MANUAL
(For models manufactured since 11/21)
COPYRIGHT © JANUARY, 2022 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#CS22167 PRINTED IN CHINA
V1.01.22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T32428 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly T32428

Summary of Contents for Grizzly T32428

  • Page 1 (For models manufactured since 11/21) COPYRIGHT © JANUARY, 2022 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #CS22167 PRINTED IN CHINA V1.01.22...
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 3: Table Of Contents

    IMPORTANT NOTICE! Table Saw Modifications Required for Installation The Model T32428 can be installed on a wide range of cabinet-type table saw brands and sizes. Do not use the Model T32428 with hybrid table saws. Installation usually requires permanent modification to your table saw or its parts.

  • Page 4: Introduction

    Always consider safety first, as it applies to your individual working conditions. Use this equipment and machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equip- ment, or poor work results. Model T32428 (Mfd. Since 11/21)

  • Page 5: Section 1: Safety

    Never operate under the influence of drugs or injury or blindness from flying particles. Everyday alcohol, when tired, or when distracted. eyeglasses are NOT approved safety glasses. Model T32428 (Mfd. Since 11/21)
  • Page 6 Make sure they are properly installed, you experience difficulties performing the intend- undamaged, and working correctly BEFORE ed operation, stop using the machine! Contact our operating machine. Technical Support at (570) 546-9663. Model T32428 (Mfd. Since 11/21)

  • Page 7: Section 2: Setup

    (570) 546-9663. IMPORTANT: Save all packaging materials until you are completely satisfied with the equipment and have resolved any issues between Grizzly or the shipping agent. You MUST have the original packaging to file a freight claim. It is also extremely helpful if you need to return your equipment later.

  • Page 8: Inventory

    C. Hex Bolts M8-1.25 x 25 ......4 D. Lock Washers 8mm........4 Figure 1. Roller system. E. Hex Nuts M8-1.25 ........4 Flat Washers 8mm ........6 G. Mounting Template (Not Shown) ....1 Figure 2. Loose inventory. Model T32428 (Mfd. Since 11/21)

  • Page 9: Hardware Recognition Chart

    Hardware Recognition Chart USE THIS CHART TO MATCH UP HARDWARE DURING THE INVENTORY AND ASSEMBLY PROCESS. Flat Head Screw Model T32428 (Mfd. Since 11/21)

  • Page 10: Site Considerations

    Only install in an as required by the maintenance and service access restricted location. described in its manual. See below for required space allocation for this roller system. 36½" 40" (From Saw Cabinet) Figure 3. Minimum working clearances. Model T32428 (Mfd. Since 11/21)

  • Page 11: Mounting

    4 ⁄ " below table may result in strains, back surface. injuries, crushing injuries, or property damage. Use center punch to mark (4) mounting holes indicated on mounting template. Model T32428 (Mfd. Since 11/21)
  • Page 12 10. Lift roller frame to straighten folding support arm and extend roller frame (see Figure 9). Cam Lock Knob (1 of 2) Figure 7. Cam lock knobs in UP position. Figure 9. Extending roller frame. -10- Model T32428 (Mfd. Since 11/21)
  • Page 13 — If there is a dust port or other fixture in cabinet preventing this step, proceed to Step 15. Figure 11. Location of roller frame adjustment hex bolt and jam nut. Figure 13. Location of lower mounting holes. -11- Model T32428 (Mfd. Since 11/21)
  • Page 14 Step 14. Support Bracket Mounting Beam Support Bracket Figure 15. Lower portion of mounting arm secured to cabinet. Figure 14. Location of support bracket and fasteners. -12- Model T32428 (Mfd. Since 11/21)

  • Page 15: Section 3: Operations

    Dynamic forces involved with processing large/heavy workpieces cause unsecured roller system to shift during cutting operations, which could result in kickback injuries. To reduce this risk, properly secure roller tables to outfeed side of machine. -13- Model T32428 (Mfd. Since 11/21)

  • Page 16: Adjusting Cams

    (see Figure 18), then tighten the lock knobs. The cams on the Model T32428 have two posi- tions: UP and DOWN. The UP position aligns the rollers with the surface of the table saw table (see Figure 16).

  • Page 17: Raising/Lowering Roller System

    To raise the roller system, simply grip the outer- most rollers or roller frame, then lift the frame until the folding support arm locks in place. Figure 20. Lowering roller system. Figure 19. Raising roller system. -15- Model T32428 (Mfd. Since 11/21)

  • Page 18: Section 4: Maintenance

    Cleaning & Pivot Point Protecting Figure 21. Location of hinge and pivot points. Cleaning the Model T32428 is relatively easy. Roller Axles Vacuum excess wood chips and sawdust, and Oil Type ....T26685 or ISO 32 Equivalent wipe off the remaining dust with a dry cloth. If any Oil Amount ..........

  • Page 19: Section 5: Service

    2. Folding support arm fasteners are too tight. 2. Loosen fasteners. Rollers are 1. Roller frame adjustment plate is adjusted 1. Adjust roller frame adjustment plate (Page 11). not parallel incorrectly. with table saw surface. -17- Model T32428 (Mfd. Since 11/21)

  • Page 20: Section 6: Parts

    SECTION 6: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability. Main BUY PARTS ONLINE AT GRIZZLY.COM! -18- Model T32428 (Mfd.
  • Page 21 HEX BOLT M4-.7 X 50 PT32428009 HEX NUT M8-1.25 PT32428020 LOCK NUT M4-.7 PT32428010 LOCK WASHER 8MM PT32428021 LOCK NUT M8-1.25 PT32428011 FLAT WASHER 8MM BUY PARTS ONLINE AT GRIZZLY.COM! -19- Model T32428 (Mfd. Since 11/21) Scan QR code to visit our Parts Store.

  • Page 22: Labels & Cosmetics

    Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this equipment MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com. BUY PARTS ONLINE AT GRIZZLY.COM! -20- Model T32428 (Mfd.

  • Page 23: Warranty & Returns

    WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents