Sony MHC-1600 Operating Instructions Manual page 25

Hide thumbs Also See for MHC-1600:
Table of Contents

Advertisement

sftetle)
Storing Stations
You can store 20 FM stations and 10 AM
stations in a desired sequence, so that you
can tune in the stored station directly by
entering the preset number.
This operation is impossible with the
remote commander.
1 Tune in the desired station.
2 Press MEMORY/NEXT.
"MEMORY"
and the preset numbers
appear on the display.
eo While "MEMORY"
is on (for about 4
seconds), press + or — to select a
desired preset number.
>
Press MEMORY/NEXT.
The preset number appears and the
station is stored.
Repeat steps 1 to 4 for each station to be
stored.
Memorisation des stations
Il est possible de mémoriser 20 stations FM
et 10 stations AM dans l'ordre souhaité.
Ensuite, il est possible de rappeler
directement ces stations en spécifiant le
numéro du préréglage.
Cette opération n'est pas possible avec la
telécommande.
1
Accorder la station souhaitée.
2 Appuyer sur MEMORY/NEXT.
"MEMORY"
et les chiffres préréglés
apparaissent sur l'affichage.
~
3 Pendant que "MEMORY"
est affiché
(environ 4 secondes), appuyer sur + ou
— pour séléctionner le numéro de
préréglage souhaité.
4 Appuyer sur MEMORY/NEXT.
Le numéro préréglé apparait et la
station est mémorisée.
Répéter les démarches 1 a 4 pour chaque
station a mémoriser.
MERORY
Adie
dlizy-
L a z y
If you cannot store a station successfully
Press MEMORY/NEXT
again so that
"MEMORY"
appears, then proceed with
steps 3 and 4 above.
Be sure to operate while "MEMORY"
is on
(about 4 seconds).
If you selected the wrong preset number
Press MEMORY/NEXT
again and then
proceed with steps 3 and 4.
To change the preset station
Store the desired station on the desired
preset number by proceeding with the
above steps.
The station previously preset will be
érased.
Erasing only is not possible.
En cas d'impossibilité de mémorisation des
stations
Appuyer a nouveau sur MEMORY/NEXT
pour faire apparaitre "MEMORY",
puis
effectuer les démarches 3 et 4 ci-dessus.
Bien veiller a procéder pendant que
"MEMORY"
est affiché (environ 4
secondes).
En cas de sélection erronée du numéro de
préréglage
Appuyer a nouveau sur MEMORY/NEXT
et
effectuer les démarches 3 et 4.
Pour modifier une station préréglée
Mémoriser la station souhaitée sur le
numéro de préréglage voulu en effectuant
les démarches ci-dessus.
La station préalablement préréglée
s'efface.
Il n'est pas possible d'effacer une station
sans en mémoriser une autre.
ERT

Advertisement

Table of Contents
loading

Table of Contents