Table of Contents
Advertisement
8.
Maintenance
8.1.
Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside
Disconnect power supply before servicing or cleaning.
8.2.
Preventive Maintenance
Attention
Before each use, examine the device visually for any defects.
Make sure that:
•
•
All screws used for installing the device or parts of the device are tightly fastened and are not corroded.
•
•
The safety devices are not damaged.
•
•
There are no deformations on housings, fixings and installation points.
•
•
The lens is not cracked or damaged.
•
•
The power cables are not damaged and do not show any material fatigue.
8.3.
Basic Cleaning Instructions
To clean the device, follow the steps below:
01) Disconnect the device from the electrical power supply.
01)
02) Allow the device to cool down for at least 5 minutes.
02)
03) Clean the device with a soft, lint-free cloth.
03)
Attention
•
•
Do not immerse the device in liquid.
•
•
Do not use alcohol or solvents.
8.4.
Corrective Maintenance
The device does not contain user-serviceable parts. Do not open the device and do not modify the device.
Refer repairs and servicing to instructed or skilled persons. Contact your Highlite International dealer for more
information.
c
40
Stage Blinder FLEX Blaze
Product code: 30785
Advertisement
Table of Contents
