Precautions For Mode Switching - Ebyte E180-Z5812 Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
Transparent Send
transmission characters
mode "+++"
Universal After
mode the
use
configuration
command
"Clear Ports and
Properties"
Directly restore
factory settings

4.5.2 Precautions for mode switching

The module actually only has HEX command mode and transparent transmission mode. AT command mode can be

regarded as a special state in transparent transmission mode.
Restart the module in AT command mode. The default state of the module is transparent transmission mode.

The HEX command mode switches between transparent transmission mode or AT mode, which is determined by the mode

before the last switch to HEX mode.
In universal mode, only HEX commands can be used for control. In universal mode, HEX commands can also be used to

simulate data transparent transmission.
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
3
exiting
network,
the
Send 3 characters "+AT"
none
E180-Z5812 Series User Manual
none
20