Faq; Transmission Distance Is Not Ideal - Ebyte E180-Z5812 Series User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
command.
Source short address = 0x0000, this control command is sent by the coordinator.

Source port = 0x01, this command is sent by the coordinator using port 0x01.

Frame number = 0x75, which is the same as the frame number of the ZCL control command sent.

Command direction = 0x00, which is a Client->Sever command, that is, the command sent by the control end to the

controlled end.
Cluster ID=0x0500, which is a security sensor class command.

Manufacturer code=0x0000

Signal strength RSSI=0xC8, converted to -56dbm

Command ID=0x00, corresponding to the control command just sent

ZCL status = 0x00, the command just sent was correctly received and processed by the gateway.

After the command is issued, the sensor alarm is displayed on the APP.

7 FAQ

7.1 Transmission distance is not ideal

When there are straight-line communication obstacles, the communication distance will be correspondingly attenuated;

Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
E180-Z5812 Series User Manual
36