Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
The format of the execution command is the direct format of "AT+command code". The execution command ends with the last
byte of the command code, and no bytes are continued after it, including the carriage return symbol, otherwise the input is invalid.
Such as "AT+JOIN", "AT+LEAVE". Executing the command input effectively returns "OK\r\n", that is, receiving an "OK" with a
carriage character at the end. If the input command ends incorrectly, the module returns "INVALID\r\n".
4.4.2 Query formula
The format of the query command is "AT+command code?", which ends with an ASCII "?" (hexadecimal 0x3F). The query
command is used to query the current value of a parameter of the module and print the query value through the serial port in ASCII
format.
4.4.3 Setting type
The format of the setting command is "AT+command code=numeric value", that is, the end of the command code needs to be
followed by the ASCII "=", and the "=" is followed by the numerical value. Depending on the command, the numerical value can be
input in decimal or hexadecimal format, expressed in the format of %d or %x. If multiple parameters are entered, they need to be
separated by ",". For details, please refer to "Ebyte ZigBee 3.0 Module AT Command Standard Specification".
4.4.4 AT command directory
Command function
Exit AT mode to HEX mode
Network or create a new
network
Module reset
Off the grid
Enter transparent transmission
mode
Automatically bind target
Read device information
Set or read baud rate
Set or read the target address
Set or read the target port
Set or read sleep level
Set or read ModbusID
PWM output
Acquire ADC
Enter test mode
Note: The red fonts in the above table are special support instructions for E180-Z5812 series modules .
4. 4.5 New AT command
Set or read Modbus ID
1
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
command code
implement
AT+EXIT
AT+JOIN
AT+RESET
AT+LEAVE
AT+SEND
AT+FIND
AT+INFO
AT+BAUD
AT+DSTADDR
AT+DSTEP
AT+LPLEVEL
AT+MBID
AT+PWM
AT+ADC
AT+TEST
E180-Z5812 Series User Manual
Inquire
set up
Y
N
N
Y
N
N
Y
N
N
Y
N
N
Y
N
N
Y
N
N
Y
N
N
N
Y
Y
N
Y
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
N
Y
N
N
Y
18
Advertisement
Table of Contents
