CC Debugger connecting E18 modules/test kit Target Voltage Sense P2.2 DC(Debug Clock) DD(Debug Data) P2.1 RESETn RESET For the pin definitions of E18 series modules/test kits, please refer to the relevant product manuals. Chengdu Ebyte Electronic Technology Co,;Ltd Copyright @2012–2023,...
Chengdu Ebyte Electronic Technology Co,;Ltd AN2022001 Step 4 Connect USB cable Connect the USB cable to the debugger and then to the PC. Step 5 Associate a USB device with a USB driver When the debugger/programmer is connected to the PC, the PC will detect the new USB device. Windows will automatically handle the installation and association of the relevant drivers.
Chengdu Ebyte Electronic Technology Co,;Ltd AN2022001 Step 7 Flash firmware Opent SmartRF™ Flash Programmer: ○ ○ ○ ○ ○ ○ 1 Select “Program CCxxxx SoC or MSP430”; ○ 2 Displays the successfully recognized SoC chip, it can be considered that the connection is successful;...
Ning About us Technical support: support@cdebyte.com Documents and RF Setting download link: https://www.ru-ebyte.com Thank you for using Ebyte products! Please contact us with any questions or suggestions: info@cdebyte.com ------------------------------------------------------------------------------------------------------------ Fax: 028-61543675 ext. 821 Web: https://www.ru-ebyte.com Address: Innovation Center D347, 4# XI-XIN Road,Chengdu, Sichuan, China Chengdu Ebyte Electronic Technology Co,;Ltd...