The control panel on the bike and the remote control are interconnected. When the
battery light on the control panel is on continuously, the winch system is activated and the
remote control (Remote Control, RC) is charged. When it starts flashing, the battery of the
remote control is almost empty and needs to be replaced.
Follow the next steps to replace the remote-
control battery.
1.
Remove the cover on the back by
unscrewing the two screws.
2.
Replace the battery (CR2032, 3V), note
position +/-, and mount the cover.
Batteries are polluting to the environment.
When disposing of batteries, follow local
regulations.
Version 24.01
Remote control
1.
2.
39/51