Van Raam VeloPlus3 User Manual page 37

5. Use the control panel on the bicycle or the
remote control to unwind the winch. Press
and hold the button and at the same time
guide the winch so that it unwinds correctly.
Attention! Do not roll out the
winch beyond the red line on the
belt, otherwise the belt will roll
back on incorrectly.
6. Place the wheelchair straight in front of the
ramp and secure the hook to the wheelchair.
Attention! Place the hook as close to
the ground and in the middle of the
wheelchair as possible to prevent the
wheelchair from tilting and twisting.
7. Use the control panel to rewind the winch.
Hold down the button and at the same time
guide the wheelchair so that it is positioned
straight onto the ramp.
8. Pull the wheelchair onto the ramp until the
ramp tilts and locks automatically and you
hear an audible click.
Version 24.01
Control panel on bike
[A]
5.
Remote control
"click" !
8.
37/51