Table of Contents
Advertisement
Wheelchair transport
If you want to transport a wheelchair on the
VeloPlus3, follow the instructions below.
1. Attach the parking brake to the bike by
squeezing the left brake [A] and lock it with
the pin [B].
2. Remove the safety pin.
3. Pull the handle up so the ramp unlocks and
falls down.
4. Push the wheelchair backwards on the
ramp. Push the wheelchair until the ramp is
tilting and locks itself automatically with a
clear noticeable click.
5. Attach the wheelchair with the three belts.
Push the button to release the belt and
attach the hooks to the wheelchair.
Always place the wheelchair forward, in
the driving direction, on the ramp. (see
image)
Be sure that the ramp is locking! Failing
to do so may result in serious injuries.
If the ramp does not lock properly then
use your foot [A] to push until the
ramp locks.
Version 24.01
[B]
1.
2.
[A]
[A]
3.
4.
"click" !
5.
11/51
Advertisement
Table of Contents
