Table of Contents
Advertisement
Winch system
It is possible to place the wheelchair on the bike
with the help of a winch.
To use the winch system:
1. Switch on the electrical system. Make sure
that the light on the control panel is on. If
this is not the case, you can switch on the
winch system by briefly pressing the on/off
button on the display of the electrical
system.
2. Put the bicycle on the parking brake by
squeezing the left brake [A] and securing it
with the lever [B].
3. Remove the safety pin.
4. Pull the handle upwards so that the ramp
unlocks and falls down.
Version 24.01
1.
[B]
2.
[A]
3.
Light
4.
36/51
Advertisement
Table of Contents
